1 ftp-639usl100-r series preliminary n over view the ftp-639usl series is 24v driven receipt printer unit with cutter for 3 inch wide paper. the unit has our high-speed ftp-639mcl mechanism, cutter and control board, with an integrated paper feed and built-in paper guide section. the receipt printer unit is most suitable for applications such as kiosk, atm, receipt, label, and ticket issuing printers for various other equipment. n features ? external presenter option ? medium duty unit (mounting is easy) ? ultra high speed printer (125/200mm / sec.) ? auto cutter included ? paper near end-detection function ? up to 6 inch paper roll diameter ? rear paper auto loading ? paper jam detection ? prints 2-d barcodes ftp-639usl100-r series 24v driven receipt , ticket printer 3 kiosk printer unit n d esignation *: interface board is ftp-629dsl350 series ftp-639usl100 - horizontal ftp-639usl100 - vertical item part number comment printer module interface usb (ver 2.0) ftp-639usl101* without presenter serial (rs-232c) / usb ftp-639usl102* usb (ver 2.0) FTP-639USL201 with presenter serial (rs-232c) / usb ftp-639usl202 cables usb interface ftp-629y301 serial interface ftp-629y302 power for logic, head, motor ftp-629y603
2 ftp-639usl100-r series preliminary interface serial (rs232c), usb 24vdc 5%, voltage current : average *1 ( ): peak 12.5% printing ratio for head 1.0 (2.0) a (at 200 mm/s printing speed, 1 division) 0.7 (1.0) a (at 125 mm/s printing speed, 2 divisions) 0.6 (1.0) a (at 80 mm/s printing speed, 2 divisions) 0.6 (2.0) a (at 80mm/s printing speed, automatic division) for print motor 24vdc 5%, 1.1 a maximum, 0.9a average for cutter 24vdc 5%, 1.3 a maximum for logic 5vdc 5%, 0.2 a maximum (converted from 24v) part number ftp-639usl101/102/201/202 printing method thermal-sensitive line dot method dot structure 576 dots/line dot pitch (horizontal) 0.125 mm (8 dots/mm)dot density dot pitch (vertical) 0.125 mm (8 dots/mm)line feed pitch effective printing area 72 mm paper width 80 mm paper thickness 60 to 100 m paper print length 50 to 250mm cutting type full or partial number of columns 48 columns/line (1224 dot font) maximum printing speed 1600 dotlines/s (200 mm/s) page mode middle speed mode 80mm/sec. without automatic division high speed mode 125 mm/sec.without automatic division ultra high speed mode 200 mm/sec.without automatic division alphanumeric kana: 159, registered: 94, international : 195, ocr: 103 character types jis kanji (ftp-629dsl400): approximately 6800 24 12 dots, (3.0 1.5 mm), 48 columns 24 24 dots, (3.0 3.0 mm), 24 columns 16 8 dots, (2.0 1.0 mm), 72 columns 16 16 dots, (2.0 2.0 mm), 36 columns ocr i: 24 40, 24 columns ocr iii: 24 48, 24 columns ocr iv: 3660, 16 columns expanded: 2448, 24 columns n specific ations specifcations item +0 -1 character composition, dimensions (hw), number of characters power supply (continued)
3 ftp-639usl100-r series preliminary operating temperature C20?c to +60c operating humidity 10 to 85% rh (no condensation) storage temperature C25?c to +65c (excluding paper) storage humidity 5 to 90% rh (no condensation) head temperature by thermistor (applied energy control, abnormal temperature detection) detection paper out/mark detect by photointerrupter platen open by microswitch near end paper by mechanical switch for rear insertion use (80 mm width) : ftp-030p0701/p0102 recommended papers oji paper : pd150r,pd160r-n,pd170r nippon paper : tf50ks-e,tf60ks-e, tf50ks-e4 mitsubishi paper mills : p220vbb-1,afp-235 83mm 150mm (continued) *1: 24vdc, minimum head resistance. n functions n interfa ce , command, options please refer to the ftp-629dsl350 series. interface command options, please see ftp-609 datasheet. m e t im e t i . 1n o i t c n u f t n i r p t s e t. 9n o i t c e t e d y t i l a m r o n b a m a r l a n r e t n i . 2d e e f r e p a p. 0 1n o i t c e t e d y t i l a m r o n b a r e t t u c . 3n o i t c e t e d t u o r e p a p. 1 1n o i t c e t e d k r a m . 4n o i t c e t e d d n e r a e n r e p a p. 2 1n o i t c e t e d y t i l a m r o n b a n o i t a r e p o u c m . 5n o i t c e t e d n e p o n e t a l p. 3 1g n i v a s r e w o p r o t o m . 6n o i t c e t e d y t i l a m r o n b a e r u t a r e p m e t d a e h l a m r e h t. 4 1n o i t c e t o r p n o i t c e n n o c s i d y l p p u s r e w o p . 7n o i t c e t e d e r u t a r e p m e t r o t o m. 5 1n o i t c e t o r p r o t o m . 8n o i t c e t e d y t i l a m r o n b a e g a t l o v. 6 1n o i t c e t o r p d a e h l a m r e h t dimensions 120.0(w) 100.0(d) 80.0(h) mm weight (mechanism, cutter, board, frame) approximately 760g without arm, 990g with arm pulse durability : 100 million pulse/dot (using fujitsu's standard mechanism driving method) expected life wear resistance: 100 km (at 12.5% printing ratio) cutter 1,000,000 cuts platen 5,000 cycles specifcations item environmental conditions recommended thermal sensitive paper paper diameter standard extended
4 ftp-639usl100-r series 1. external dimension chart of the control board external dimension specific ations no. name function remarks cn1 power connector connect +24v power supply - cn2 rs-232 connector connect rs-232 interface depends on models cn3 operation panel connector connect to operation panel - cn4 usb interface connector connect usb interface depends on models cn5 thermal head connector connect thermal head - cn6 paper feed motor connect paper feed motor - cn7 cutter connector connect cutter motor - cn8 near end connector connect near end switch or sensor - cn9 external sensor connector connect external sensor optional 2. c onnector types of control board unit: mm preliminary
5 ftp-639usl100-r series modular printer without presenter and standard paper roll preliminary n dimensions (1) paper diameter: 83mm preliminary 2/3 (2) paper diameter 83mm(lower installation) (1) paper diameter 83mm(horizontal installation) 2/3 (2) paper diameter 83mm(lower installation) (1) paper diameter 83mm(horizontal installation) lower installation horizontal installation 120 120 preliminary
6 ftp-639usl100-r series modular printer without presenter and large paper roll preliminary n dimensions (1) paper diameter: 150mm 3/3 (4) paper diameter 150mm(lower installation) (3) paper diameter 150mm(horizontal installation) horizontal installation 3/3 (4) paper diameter 150mm(lower installation) (3) paper diameter 150mm(horizontal installation) lower installation 120 120 preliminary
7 ftp-639usl100-r series modular printer with presenter and large paper roll preliminary n dimensions
8 ftp-639usl100-r series preliminary n commands command contents ht moves print position to the next tab. lf line feed. ff feeds forms (new page). esc em+n setting the amount of the feeding at automatic paper feed. ecs rs sets reverse printing. esc us resets reverse printing. esc sp+n character spacing setting. esc ! + n sets print mode. esc % + n external registration character specifcation/cancellation. esc & +y+c1+c2+x+d1to dn external registration character defnition. esc *+m+n1+n2+d1+dn sets bit image mode. esc - +n undeline setting. esc 2 sets 1/6 inch line feed length. esc 3+n sets the line feed length. esc ? + n external registration character deletion. esc @ printer initialization. esc a+n sets the space between the line. esc c+n sets the page length by character line. esc d+d1+dn +nul sets the tab position. esc j+n feeds paper in forward direction and prints. esc k+n reverse paper feed. esc r+n selects international character. esc v+n right rotation 90 specifcation / cancellation esc x+m+n setting the turning time of the motor excitation. esc c+1+n sets internal processing. esc c+5+n panel switch enable/disable setting. esc d+n printing and n-line feeding. esc e+n prints and reverse feeds n-lines. ecs s+n sets printing speed. ecs t+n character code table selection. esc {+n sets/resets upside down printing.
9 ftp-639usl100-r series preliminary command contents esc del+n fs !+n kanji printing mode collective specifcation. fs & kanji printing mode specifcation. fs - + n kanji underline specifcation/cancellation. fs *+ m+n1+n2+d1 to dn high speed collective image printing specifed. fs . kanji printing mode cancellation. fs 2+c1+c2+d1 to dn external character defnition. fs 9+n sets the detection functions. fs c+n kanji code system selection. fs e+n correction of impressed energy. fs s+n+n1+n2 kanji spacing setting. fs w+n kanji double height adn width printing specifcation/cancellation. fs r+n* 1 parameter transmission. gs ! + n character size specifcation. gs & +m + x + y1 + y2 + d1 to dn registered bit image defnition. gs' + m + n registered bit image printing.. gs (+e+l1+l2+n+d,~dq rs-232c communication setting* 1 gs < line feeds to the next mark. gs a+m+n sets the line feed length after mark detection. gs e+n sets print quality. gs l+n1+n2 left margin position setting. gs v+m+n gs w + n1 + n2 printing area width setting. gs a+n automatic status transmission setting* 1 gs e+n+m sets bar code width. gs h+n sets bar code height. gs k+m+n+ d1 to dn bar code printing. gs w+n sets bar code length. commands continued * 1 : these commands are valid with ftp-629dsl350 series serial interface.
10 ftp-639usl100-r series preliminary japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141 8630, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@fcl.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: components@us.fujitsu.com web: http://us.fujitsu.com/components/ europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: emea.fujitsu.com/components/ asia pacifc fujitsu components asia ltd. 102e pasir panjang road #01-01 citilink warehouse complex singapore 118529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com web: http://www.fujitsu.com/sg/services/micro/components/ fujitsu components international headquarter offces ?2012 fujitsu components america, inc. all rights reserved. all trademarks or registered trademarks are the property of their respective owners. fujitsu components america or its affliates do not warrant that the content of datasheet is error free. in a continuing effort to improve our products fujitsu components america, inc. or its affliates reserve the right to change specifcations/datasheets without prior notice. rev. october 16, 2012. options 1. cables name part number cable length interface cable (board to mechanism) usb ftp-629y301 500mm (19.7 inch) rs-232c ftp-629y302 500mm (19.7 inch) power supply cable logic, head, motor ftp-629y603 300mm (11. 8inch) 2. driver lsi of control board name part number quantity / tray remarks mcu ftp-629cu350 84 on-board flash and sram
|
